TyreON TPH50T-3H Air hydraulic jack 50 Tons gato hidráulico nuevo

Capacity 50T pneumatic floor jack
3-stage jack 50T - 30T - 15T
Lifting height 22 cm - 65,1 cm
Model Long chassis - Long Bar
Weight - Total length 63 kg - 203 cm
Application Intensive commercial use
Delivery includes Extensions 80 + 40 + 20 mm
Hydraulic oil is filled



Long chassis - Long Bar
Pneumatic floor jack for safe lifting of trucks, trailers, commercial vehicles, buses, construction and industrial machines, agricultural vehicles and forklifts.
With the minimum height of 20 cm, almost every lifting point can be reached. Thanks to the lifting height of 65 cm, the pneumatic hydraulic truck jack is also suitable for vehicles with high axles.
CE approved: EN 12100:2010 Safety of Machinery + EN 1494:2000+A1:2008 Mobile or Moveable Jacks
Metal shrinks and expands due temperature changes. A TyreON pneumatic floor jack will not fail at extremely low or high temperatures.
The pneumatic truck jack has undergone load testing at -25 ° C to + 45 ° C, and static and dynamic off-center load safety tests have also been done.
The handle can be locked in 3 positions; 45º-90º and 180º.
The lifting cylinders are resistant to wear and corrosion due internally and externally chrome-plated cylinders.
All lifting cylinders are equipped with 2 industrial seal rings to prevent oil-escape.
Stage 1
Stage 2
Stage 3
This pneumatic floor jack with 3 heavy pistons need 8-12 Bar air to lift loads up to 50,000 kg. TyreON pneumatic truck jacks are easy to operate and have many safety options, such as a joystick with a dead man's control that also controls an evenly slowed fall.
TyreON TPH50T-3H Pneumatic floor jack - Pneumatic truck jack
TyreON pneumatic floor jack - Functionality & Safety
Dead man's control
  - 
When the hold-to-run joystick is released, the pneumatic floor jack switches off and comes to a stop immediately
Pressure relief valve
  - 
Prevents damage to the pneumatic truck jack when the load is to heavy
Descend the load evenly
  -  
A pressure reduce-valve ensures an evenly slowed fall, even with the heaviest load
Lifts quickly
 -
With a pneumatic high pressure pump
Accelerated to the load
  -  
System to raise the cylinders onto the load at a higher speed and also to lower it quickly without any load
Solid chassis
  - 
 Of thick sheet steel, perfect protection of the pneumatic pressure pump and other internal parts
Oil circulation
  -  
For example, if the pneumatic hydraulic truck jack falls on its side, no oil escapes
Fixed position and evenly loaded lifting
  -
  Non-return valves guarantee a fully fixed position with loads at all heights and a controlled even lifting speed under load
 
TPH50T-3H Air hydraulic jack 50 Tons